products

Cemented Carbide Rods

Application

SIZE:ŽÁ1-ŽÁ40

ROUGH RODS:solid rods

GROUNDED RODS :standard size (310mm/330mm),other sizes available\pcb rods

CHARACTERISITICS:made from sub-micron and ultra-fine WC with homogeneous property , good wear resistance and high toughness

APPLICATION:widely used in endmills ,micro-drills ,micro-mills etc.


Grades,properties and applications cemented carbide rods.

Grade

Density

g/cm3

Hardens

HRA&HV30

T.R.S

MPa

Performance&application recommended

YL50

13.90

87.0

2200

It is suitable for manufacturing punching dies and tools

YU06

14.7

2050.0

3000

It is suitable for manufacturing milling cutters for machining PCB.it is also suitable for manufacturing various kinds of soild cemented carbide tools for machining glass fiber,wood,plstics and brass,Alalloy etc.

YU08

14.56

1900.0

4000  

It is suitable for manufacturing micro-drills with diameter less than 0.8mmfor machining PCB ,it is also suitable for manufacturing various kinds of soild cemented carbide tools for machining glass fiber,wood,plastics,paper and drass,Al alloy etc

YU09

1

4.36

1950.0

3900

 It is suitable for manufacturing micro-drills for machining PCB, it is also suitable for manufacturing various kinds of soild cemented carbide tools for machining glass fiber,wood,plastics,paper and brass,Al alloy etc

YU12

14.05

1750.0

4000

It is suitable for manufacturing soild cemented tools for machining steels that are corrosion and heat resistant steel,stainium alloy,and non-ferrous metals

YF06

14.86

1800.0

3800

It is suitable for manufacturing drills with big diameters of 3.2-6.2mm for machining PCB,drills of 0.8-3.2mmand mills,and it is also suitable for making soild carbide tools for machining aluminum alloy,plastic,PTFE and compound materials,such as carbon fiber,etc

YF08

14.55

1800.0

3900

It is suitable for manufacturing micro-drills for manchining PCB, it is also suitable for manufacturing various kinds of soild cemented carbide tools for machining glass fiber,wood,plstics and brass,Alalloy etc.

YG6X

14.90

91.5

2000

It is suitable for manufacturing soild carbide tools and wear parts

YG8

14.7

89.8

2400

It is suitable for manufacturing carbide core and wear parts

YL10.2

14.45

91.8

3000

it is suitable for manufacturing various kinds of soild cemented carbide tools for machining heat-resistant alloys and Ti etc.it is also suitable for manufacturing micro-drills for machining PCB.

Other grades and size can be offered as per customersí» requirements